AEG Voxtel S100 - Manual (Page 26)

26
10.3.5 Set the equalizer
The phone has three different frequency range filters (NORMAL, BASS,
TREBLE) that you can set, to adjust the sound in the earpiece to suit your
preference.
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “EQLIZER”.
tPress
OK
and / to select “NORMAL” / “BASS” / “TREBLE”.
tPress
OK
to confirm the setting.
10.3.6 Select base
If you have registered the handset to more than one base, you can select
any one of them to use with your your handset.
Note:
You can only use the handset with one base at any one time.
tPress
OK
and / to select “HS SET”.
tPress
OK
and / to select “SEL BASE”.
tPress
OK
and / to select the desired base. (Note: the currently
selected base is indicated by a *.)
Note:
the handset may take a short while to search for the new base.
10.3.7 Set the handset language
The language used on the handset display may be changed from English,
if required.
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “LANGUAGE”.
tPress
OK
and / to select the desired language.
tPress
OK
to confirm.
10.3.8 Rename the handset
The handset name, displayed in the standby mode (default HS), can be
changed to any other name of up to 6 letters.
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “HS NAME”.
tPress
OK
and enter the name, of up to 6 letters for your handset.
tPress
OK
to confirm.
10.3.9 Choose the Information to be displayed in idle
You can choose to display the time or handset name in your idle screen.
tPress and
/ to select “HS SET”.