AEG Voxtel S100 - Manual (Page 23)

23
UK
10.1.3 Set the time
tPress and
/ to show “CLOCK”.
tPress
OK
and / to select “SET TIME”.
tPress
OK
and then to enter the time information in 24 hour format.
tPress
OK
to confirm your setting.
Note:
If time has been set before, the current time will display, otherwise,
“HH:MM” will display.
10.1.4 Set the date
tPress and
/ to show “CLOCK”.
tPress
OK
and / to select “SET DATE”.
tPress
OK
to enter the date information in the format you set in section
“10.1.1 Change the date format”.
tPress
OK
to confirm your setting.
Note:
If date has been set before, the current date will display, otherwise,
“DDMMYY” will display.
10.2 Alarm settings
You can set an alarm time on this phone. When an alarm is set, the is
shown on the handset display.
When the alarm time is reached, the
and “ALARM ON ” flash on the
handset display, and the alarm tone rings for 45 seconds. You can press
any key to disable the alarm. If snooze function is activated, the alarm will
sound again at the end of the snooze period of 7 minutes.
You can also press and hold while the alarm is sounding to stop the
alarm and turn off the snooze function.
Note:
>A key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
>The alarm volume level is the same as the settings of the handset
ringer volume. If the handset ringer is set to “OFF”, the alarm still
sounds at “VOLUME1” level.
>During an external call or internal call, if an alarm is set and when
the alarm time is reached, the and “ALARM ON” will still flash.