AEG Voxtel S100 - Manual (Page 27)

27
UK
tPress
OK
and / to select “DISPLAY”.
tPress
OK
and / to select “HS NAME” or “TIME”.
tPress
OK
to confirm.
10.3.10 Set the auto answer
If you turn on the Auto Answer, you can answer a call automatically by just
lifting the handset off the base or charger, without having to press any key.
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “AUTO ANS”.
tPress
OK
and / to turn “ON” or “OFF” the auto answer feature.
tPress
OK
to confirm.
10.3.11 Set the direct memory keys
There are three direct memory keys
M1
,
M2
and
M3
. You can store a
number of up to 20 digits into each of these keys and dial them directly
from idle mode, by pressing and holding the key more than 2 seconds.
tPress and
/ to select “HS SET“.
tPress
OK
and / to select “MEM KEY“.
tPress
OK
and / to select the desired memory key from
M1
,
M2
and
M3
.
tPress
OK
to enter a new number or edit the number stored already.
tPress
OK
to confirm.
10.3.12 Set the mailbox number
You can store a number of up to 20 digits, which can be dialled out directly
from idle mode by pressing and holding the digit 1 key for more than 2
seconds. This may be used to store your network voice mail number, such
as 1571, for easy access to that service.
tPress and
/ to select “HS SET”.
tPress
OK
and / to select “MAILBOX”.
tPress
OK
and then enter a new number or edit the mailbox number.
tPress
OK
to confirm.
10.4 Base settings
10.4.1 Set the base ringer melody
tPress and
/ to select “BS SET”.
tPress
OK
and / to select “RINGER”.
tPress
OK
and / to select the desired ringer melody (a total of 5
melodies for your selection).