Addonics Technologies JUPITER CIPHER EXDRIVE JCEDIS128 - Manual (Page 16)

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 15
7.3 FIREWIRE USIB Cable (Model: AAFWC-406)
Note: Firewire Jupiter Cipher ExDrive is Plug and Play under Windows XP,
2000 and 98Me. There is no third party driver needed.
Driver Installation for Win98 and Win98SE
After plugging in the cable some system might prompt you for Win98SE CD,
in case you don’t have the Win98SE CD and the wizard prompts you for:
NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS
NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS
Reboot your system.
Disk Management for Window 98
1. Select Start > Setting > Control Panel > System. The System Properties
window opens.
2. Select the Device Manager tab, under Device type, Disk Drives, select QTS
FIREWIRE CABLE. Click the Properties button.
3. Select the Settings tab and under the Options box, click the Removable
check box. The Reserved drive letters box becomes active. Select the drive
letter for your new drive. Click Ok.
4. Click Yes to restart your system to make changes take effect.
5. Double click My Computer icon and there should be an extra drive letter
for the Jupiter Cipher ExDrive drive. You may now access the drive.