Addonics Technologies JUPITER CIPHER EXDRIVE JCEDIS128 User Manual

Page 10

Text mode
Original mode

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0

Step 2
Align the male IDE connector on the
2.5” hard drive with the female IDE
connector on the PCB. Push the hard
drive till the connector pins on the hard
drive is fully seated inside the
connector on the PCB.

Step 3
Wrap the shock absorber around the
hard drive and PCB.

Step 4
Turn over the PCB and secure the
hard drive to the PCB with the
mounting screws that come with the
kit.

Step 5
Mount the board to the bottom cover.

This manual is related to the following products:

JUPITER CIPHER EXDRIVE JCEDIU64 JUPITER CIPHER EXDRIVE JCEDIU128 JUPITER CIPHER EXDRIVE JCEDIF64 JUPITER CIPHER EXDRIVE JCEDIS192 JUPITER CIPHER EXDRIVE JCEDIU192 JUPITER CIPHER EXDRIVE JCEDIS64 JUPITER CIPHER EXDRIVE JCEDIF128 JUPITER CIPHER EXDRIVE JCEDIF192