Konica Minolta BIZHUB C30P - Manual (Page 17)

3 Screen Configuration
12
• Prompt for Admin before creating
Select this option to have a dialog box appear to ask if a printer
object should be created automatically for the found device.
• Displays only
Select this option when you do not want a printer object created
automatically for a found device. In this case, you need to click the
Add Printer button in order to create the printer object manually.
Printer naming rule
Select the rule you want to apply when naming a new printer object.
• IP address
This option causes the device IP address to be displayed as the
printer object name.
• Driver name
This option causes the applicable printer driver name to be displayed
as the printer object name.
• Model name
This option causes the device model name to be displayed as the
printer object name.
Number of Printer objects
Use this value to specify the maximum number of printer objects that
can be created on the server. Specifying “
0 ” allows an unlimited
number of printer objects.
Note
When a new printer object is made
• Shared Printer
Place a check mark in this box to allow sharing of printers registered
on the print server.
• All of the print objects in the Windows Printers folder are included in
the number of printer objects count.