Konica Minolta BIZHUB C30P - Manual (Page 12)

3 Screen Configuration
7
The printer mark shown here appears in front of the IP address of
ports that are already associated with a printer object on the
printer server.
If Creates printer object automatically or Prompt for Admin
before creating is selected in the When new printers are detected
section of the Configuration dialog box, detection of the device
launches a search for the printer driver installed on the server, and
automatically creates a printer object on the Windows print server.
Note
Port Name
These are port names of LPR printer ports registered on the server.
Related Printer
This is the name of the printer related to the LPR port.
➅
Delete Port Button
Use this button to delete the port selected in the LPR port list. Note
that this button is enabled only when a port without a printer mark is
selected in the LPR port list.
Note
• A printer object is not created automatically if the IP address of the
detected device is identical to the IP address of a device already in the
LPR port list.
• The add printer driver Wizard appears if the printer driver is not already
installed on the printer driver. Follow the instructions that appear on the
display to install the driver.
• Use the following procedure to delete a port that has a printer mark.
1. Exit PageScope Plug and Print.
2. Delete the LPR port and its associate printer object from the
Windows printer server Printers folder.
Restart the print spooler by clicking Administrative Tools
→
Services
→
Print Spooler in the Windows printer server.
3. Restart PageScope Plug and Print.
4. Check the LPR port list to make sure that the port you want to delete
does not have a printer mark next to it, and then delete the port.