Konica Minolta BIZHUB C30P - Manual (Page 11)

3 Screen Configuration
6
➃
Set IP Button/Add Printer Button
Set IP Button
Use this button to assign a regular IP address to a Device List device
that is currently assigned a temporary IP address by ATIP. Such a
device does not have a device mark in front of its IP address. See 3.3
Set IP Address Dialog Box for more information.
Note that this button is enabled only when a device without a device
mark (indicating a temporary IP address) is selected in the Device
List.
Add Printer Button
Use this button to register the device that is selected in the Device
List as a printer on the server.
Note that this button is enabled only when a device with a device
mark (indicating a regular IP address) is selected in the Device List.
Clicking this button automatically searches for the printer driver of
the selected device, creates a printer object on the Windows print
server, and displays a printer mark in front of the IP address in the
LPR port list.
Note
➄
LPR Port List
This is a list of LPR printer ports registered on the server.
Destination IP Address
These are IP addresses of LPR printer ports registered on the server.
• The add printer driver Wizard appears if the printer driver is not already
installed on the printer driver. Follow the instructions that appear on the
display to install the driver.