Konica Minolta BIZHUB C30P - Manual (Page 8)

3 Creating a Peer-to-Peer Port
3
3 Creating a Peer-to-Peer Port
3.1 By Adding a New Printer
1. Install the printer driver. Select Local printer as the connection
method, and select LPT1 under Use the following port . (For
details on installing the printer driver, refer to the User’s Guide
included with the printer.)
2. Click Start
→
Settings
→
Printers .
3. Right-click the printer that was installed, and then click
Properties .
4. Click the Details tab.
5. Click the Add Port button.
6. Select Other .
7. Select KONICA MINOLTA Peer to Peer Port under Click the
type of port you want to add , and then click the OK button.