Konica Minolta BIZHUB C30P - Manual (Page 14)

4 Peer-to-Peer Print Setup
9
2. In the Device List , select the device you want to configure. If the
device you want to configure is not in the list, specify it manually.
See 4.1.2 Configuring for TCP/IP Peer-to-Peer Printing by
Specifying the Device Manually.
3. Check the port number to be used for TCP/IP peer-to-peer printing
in the
Port Number box.
4. Click the Add Port button. Check the details of the setup in the
dialog box that appears.
5. If everything is the way you want, click the OK button.
6. When the Success dialog box appears, click OK .
Note
• The device may need to be reset after creating the port. In that case, a
dialog asking if you want to reset the device immediately will appear.