Konica Minolta BIZHUB C30P - Manual (Page 16)

4 Peer-to-Peer Print Setup
11
2. Under TCP/IP Connection , click the device specification method
you want to use to select it. The following methods are supported.
• Device Name (DNS name)
Specify the device using its host name.
• IP Address Specify the device using its IP address.
• Hardware Address Specify the device using its network
interface hardware address.
3. Type the device destination into the text box that becomes enabled
to the right of the method you select.
4. In the Port Number box, type the port number (Raw port number)
for TCP/IP peer-to-peer printing.
5. Click the Add Port button. Check the details of the setup in the
dialog box that appears.
6. If everything is the way you want, click the OK button.
7. When the Success dialog box appears, click OK .