beautypg.com

Environmental variables 43, Lparm:pcl fontnumber, Lparm:pcl fontsource – Konica Minolta Magicolor 2350EN User Manual

Page 47: Lparm:pcl linetermination

background image

Environmental Variables

43

Variable

LPARM:PCL FONTNUMBER

Choices/

Range

0-65535(dependent on FONTSOURCE and

SYMSET--see note)

Default

0

Description Selects the PCL font to be used for the current job. This

variable is used with the FONTSOURCE variable to identify
the specific font to be used.

Font numbers start at 0 if a font is set as default;
otherwise, font numbering starts at 1.

The recommended order of setting the variables affecting
the font is SYMSET, FONTSOURCE, and then
FONTNUMBER.

Variable

LPARM:PCL FONTSOURCE

Choices/

Range

I

S

Default

I

Description This variable identifies the source of the fonts to be used.

I — Internal Fonts
S — Permanent Soft Fonts

Variable

LPARM:PCL LINETERMINATION

Choices/

Range

0

1

2

3

Default

2

Description Sets the line termination value.

0—CR=CR, LF=LF, FF=FF
1—CR=CR-LF, LF=LF, FF=FF
2—CR=CR, LF=CR-LF, FF=CR-FF
3—CR=CR-LF, LF=CR-LF, FF=CR-FF