Konica Minolta Magicolor 2350EN - Manual (Page 28)

Commands 24
Command
ENTER
Syntax @PJL ENTER LANGUAGE = personality
[]
Description This kernel command is used when setting the printer lan-
guage for the language used in the current print job.
Personality is the language of the print job, such as Line-
printer, PCL, or PostScript.
Notes Immediately following the code on the ENTER
command line, the printer assumes the language specified
by the personality to process the current print job. The
printer will continue to treat the job in the new language
until another ENTER command, a command is
found, or a print job end of file is found.
Command
EOJ
Syntax @PJL EOJ [NAME = "job name"] []
Description This command indicates the end of the current print subjob.
The optional Name variable should be used if the JOB
command used this option to name the print subjob.
Notes This command must be used in conjunction with the JOB
command. Don’t use the JOB or the EOJ command
separately.