Konica Minolta BIZHUB C351 - Manual (Page 99)

2 Scanning Documents
2-66 C351
Scan
nin
g
Do
cu
men
ts
Chapter 2
2.7 Checking the Settings
Checking the Settings
The selected setting can be checked in detail. The destination can be
changed on this screen.
The settings that can be viewed and changed are as follows:
The notification destination cannot be specified when using Scan to E-mail.
2
Note
If Changing the “From” Address from [Administrator Setting] — [System
Setting] — [Restrict User Access] — [Restrict Access to job Setting] is
specified as restricted, direct input cannot be performed.
To check a job
1
Press the [Mode Check] key in the control panel while the Scan mode
screen is displayed.
The Mode Check screen appears.
Item Description
Type Displays the type of transmission.
Name Displays the registered destination name.
Dest. Displays the destination file path or the e-mail address.
Edit Touch to change the destination.
Set Dest. Specify the notification destination for the e-mail message
that is sent when the data is transmitted, etc.
Save in Add. Book Touch when the address is not registered in the address book
such as when the address is entered through direct input.
Mode Check