Konica Minolta BIZHUB C351 - Manual (Page 250)

Specifying Settings From the Control Panel 3
C351 3-139
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.35 External Server Authentication
If performing user authentication using an external server, multiple settings
are required depending on the type of server being used. Specify the settings
by using the following procedure as reference.
You can specify the external server authentication settings according to the
network environment that is to be used.
2
Note
In the future, the operating system may be updated or a new operating
system may be released. For details, refer to the manual of the operating
system.
Using Active Directory
Before specifying the settings, prepare the information described below.
Administrator password (required)
MFP IP address (required)
Subnet mask (required)
Default gateway
Priority DNS server address (required)
Substitute 1 DNS server address
Substitute 2 DNS server address
DNS default domain name
DNS host name
Active Directory default domain name (required)
NTP server (Time Adjustment Setting) address
List of the users for authentication (required)
Item Description (reference)
Active Directory Specify when using Windows 2000 Server, 2003 Server.
NTLM v1 or NTLM v2 Specify when using Windows NT 4.0 Server. NTLM v2 is
available from Windows NT 4.0 (Service Pack 4).
NDS Specify when using NetWare 5.1 or NetWare 6.0.