Konica Minolta bizhub C300 - Manual (Page 74)

Using copy functions 2
C300 2-37
Using copy f
unct
ions
Chapter 2
To select a Paper Type setting
If a setting for special paper, such as OHP and other
special paper, is selected for a paper tray, that tray is
not selected automatically with the “Auto Paper Select”
setting or the automatic paper-tray-switching feature.
However, a paper tray set to “Single Side Only” is given
priority when the “Auto Paper Select” setting is
specified.
There are limits on the types of paper that can be
loaded in a paper tray. For details on the types of paper
that can be loaded, refer to the User’s Guide [Copy
Operations].
If OHP or thick paper is loaded into the paper tray, be
sure to select the corresponding paper type, otherwise
a paper misfeed may occur.
The following procedure describes how to specify the
setting for special paper loaded into the tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.