Konica Minolta bizhub C300 - Manual (Page 53)

2 Using copy functions
2-16 C300
Using copy f
unct
ions
Chapter 2
2.5 Selecting a Simplex/Duplex
setting
The type of document and copy can be specified.
The following Simplex/Duplex settings are available.
*1
If [2 1] or [2 2] is selected, select the position of
the binding margin and the orientation of the loaded
document, otherwise the copies will not be printed
as desired.
For details on selecting the position of the binding
margin for the document, refer to “Selecting the
position of the binding margin (“Margin” settings)”
on page 1-25.
For details on selecting the document orientation,
refer to “Selecting the document orientation
(“Original Direction” settings)” on page 1-23.
Setting Description
1 1 Select this setting to produce single-sided copies
from single-sided documents.
1 2 Select this setting to produce one double-sided
copy from two single-sided documents.
2 1
*1
Select this setting to produce two single-sided
copies from one double-sided document.
2 2
*1
Select this setting to produce double-sided copies
from double-sided documents.