Konica Minolta bizhub C300 - Manual (Page 70)

Using copy functions 2
C300 2-33
Using copy f
unct
ions
Chapter 2
2.11 Selecting the Paper settings
Specifying the paper size
The size of the paper loaded into the tray 1 and the
bypass tray can be specified.
For details on loading the paper, refer to the User’s
Guide [Copy Operations].
The size of the paper loaded into the tray 1 and the
bypass tray can be selected in any of the following
ways.
Setting Description
Auto Detect Select this setting to automatically detect the
size of the paper.
Inches
*1
A paper size in inches can be set so that the
paper tray is used specifically with the
selected paper size.
This is useful when the size of the paper that
is loaded cannot be automatically detected.
Custom Size
*2
A custom paper size can be set so that the
paper tray is used specifically with the
selected paper size.
Custom-sized paper can be loaded into the
tray 1 or the bypass tray.
Oversized
Paper
*3
A wide paper size can be set so that the
paper tray is used specifically with the
selected paper size.
Wide paper can be loaded into the tray 1 or
the bypass tray.