Original setting, Original setting -28 – Konica Minolta bizhub C300 User Manual
Page 113
3
Using scan functions
3-28
C300
Usin
g sca
n
fu
nct
ions
Chapter 3
Original Setting
Select the type of document that is loaded, for
example, if it contains mixed page sizes or thick paper.
These functions can be used together.
Setting
Description
Original
Direction
Select the orientation of the document. The
data is processed so that the top and bottom
of the document are correctly positioned
after the document is scanned. For details on
document orientation settings that are
available, refer to “Selecting the document
orientation (“Original Direction” settings)” on
page 1-23.
Bind
Select the binding position, such as when
holes are punched in the document or the
document is stapled.
This adjusts the scan of double-sided
documents so that the binding position is not
reversed.
Left: Select this setting for a document with
binding on the left side.
Top: Select this setting for a document with
binding at the top.
Right: Select this setting for a document with
binding on the right side.
Auto: The binding is on the long side if the
page is 11-11/16 in. or less, or it is on the
short side if the page is more than 11-11/16
in..