Konica Minolta bizhub C650 - Manual (Page 148)

C650 3-33
User Operations 3
U
s
e
r O
p
er
at
ion
s
Chap
te
r 3
0 For the logon procedure, see "Performing user authentication" on page 3-2.
1
Log on to the user operation mode through User Authentication from the control panel.
2
Press the [BOX] key.
3
Select the operation menu.
4
Select the any arbitrary User Box and touch [OK].
5
Enter the 8-digit User Box Password from the keyboard and keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 4.
6
Touch [OK].
? What if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Passwords, a message appears that tells that authentication
has not been successful. The machine then prohibits entry of the User Box Password for 5 sec. En-
ter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) set by the Administrator of the machine or more, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, rejecting any more logon attempts. To cancel the ac-
cess lock state, the Administrator of the machine must perform the Release Setting. Contact the
Administrator of the machine.