Konica Minolta bizhub C650 User Manual
Page 137
3
User Operations
3-22
C650
4
Click the [OK].
?
What happens if the User Box Password entered does not meet the requirements of Password
Rules?
%
If the User Box Password entered does not meet the requirements of the Password Rules with
[Public] selected for User Box Type, a message appears that tells that the User Box Password that
has been entered cannot be used. Click [OK] to go back to the screen of step 3. Perform steps 3
through 4 once again. For details of Password Rules, see "Password Rules" on page 1-8.
?
What happens if there is a mismatch in the User Box Passwords?
%
If there is a mismatch in the password between that entered in the "User Box Password" box and
that entered in the "Retype User Box Password" box, a message appears that tells that there is a
mismatch in the User Box Password. Enter the correct User Box Password.
?
What if no Owner Name, or a wrong one, has been entered?
%
If no Owner Name is entered, a message appears that tells that no Owner Names have been en-
tered. Enter the correct Owner Name.
%
If a user name not registered with the machine is entered in the "Owner Name" box, a message
appears that tells that the Owner Name entered in the box is illegal. Click [OK] to go back to the
screen of step 3. Perform steps 3 through 5 once again.
?
What if no Account Name, or a wrong one, has been entered?
%
If no Account Name is entered, a message appears that tells that no Account Names have been en-
tered. Enter the correct Account Name.
%
If a user name not registered with the machine is entered in the "Account Name" box, a message
appears that tells that the Account Name entered in the box is illegal. Click [OK] to go back to the
screen of step 3. Perform steps 3 through 5 once again.
?
What steps should be performed to change the User Box setting?
%
For the procedure to change the User Box setting, see "Changing the User Box Password and user
attributes and account attributes" on page 3-23.
5
Check the message that tells that the setting has been completed. Then, click [OK].