Konica Minolta bizhub 500 - Manual (Page 175)

6 Control Panel Settings
6-28 bizhub 500/420
Control Panel Settings
Chap
te
r 6
9
In the Encryption Key failure screen, touch [HDD Format].
– If [Reset Encryption Key] is touched, the Register Encryption Key
screen appears. If authentication of the encryption key failed, spec-
ify the encryption key again.
10
Restart the machine.
The hard disk is encrypted.
2
Reminder
When turning the main power switch off, then on again, wait at least 10
seconds before turning it on, otherwise the copier may not function nor-
mally.