Konica Minolta bizhub 360 - Manual (Page 353)

4 Specifying Settings Using PageScope Web Connection
4-82 bizhub 360
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
Item Description
TCP/IP Enables/disables TCP/IP.
Network Speed Specify the transmission speed.
IP Address Setting Method Select the IP address setting method.
IP Address Specify the machine’s IP address (syntax: “***.***.***.***”
where the input range for *** is 0 to 255).
Subnet Mask Specify the subnet mask of the target network (syntax:
“***.***.***.***” where the input range for *** is 0 to 255).
Default Gateway Specify the default gateway of the target network (syntax:
“***.***.***.***” where the input range for *** is 0 to 255).
RAW Port Number 1 Specify the RAW port number (input range: 1 to 65535).
RAW Port Number 2
RAW Port Number 3
RAW Port Number 4
RAW Port Number 5
RAW Port Number 6
Dynamic DNS Setting Specify whether to use the dynamic DNS setting.
Host Name Enter the host name (up to 63 characters).
DNS Domain Auto Obtain Specify whether to enable the automatic acquisition of the
DNS domain name.
DNS Default Domain Name Enter the DNS default domain name (up to 254 characters in-
cluding the characters for the host name).
DNS Search Domain Name1-3 Enter the DNS search domain name (up to 254 characters in-
cluding the characters for the host name).
DNS Server Auto Obtain Specify whether to enable the automatic acquisition of the
DNS server.
Primary DNS Server Enter the priority DNS server address (syntax: ***.***.***.***
where the input range for *** is 0 to 255).
Secondary DNS Server1-2 Enter the substitute DNS server address (syntax: ***.***.***.***
where the input range for *** is 0 to 255).
SLP Enables/disables SLP.
LPD Enables/disables LPD.