Konica Minolta bizhub 360 - Manual (Page 299)

4 Specifying Settings Using PageScope Web Connection
4-28 bizhub 360
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
When “FTP: Scan” is selected
Non-Image Area Erase Select whether or not the shadows along the edges of a document are
erased from the scan.
Item Description
Item Description
No. Enter the registration number.
Name Enter the registration name (up to 24 characters).
Select from Address
Book Click , and then select the destination from the list to display the
one-touch lists.
Direct Input Directly enter the destination. Specify settings for the following.
Host Address
File Path
User ID
Password
anonymous
PASV Mode
Proxy
Port Number
When entering the host name, select the “Please check to enter host
name.” check box.
Resolution Select the resolution.
File Type Select the file format.
Scan Setting Select the unit of the data to be saved.
Simplex/Duplex Enter the destination e-mail address directly.
Original Type Select the quality of the original such as text or photo.
Separate Scan Enable/disable the “Separate Scan” function.
Density Adjust the density.
Zoom Select the enlargement or reduction ratio for scanning. Select a preset
zoom ratio or specify separate ratios for the X and Y directions.
Scan Size Select the original size (“Auto”, “Standard Size”, “Custom Size”).
For “Custom Size”, specify the horizontal and vertical scanning sizes.
E-Mail Notification The upload destination of the file can be notified to the specified ad-
dress.
Destination Click to select the notification addresses.
File Name Enter the file name (up to 30 characters).
Original Direction Select the orientation of the original document.
Bind Select the original binding position.
Special Original Select whether the document contains mixed page sizes or is Z-
folded.
Book Scanning Select whether or not to enable book scanning. If “ON” is selected, the
scanning method and binding position are specified.
Booklet Pagination Select whether or not to enable page scanning. If “ON” is selected, the
binding position is specified.