Konica Minolta bizhub 360 - Manual (Page 177)

3 Specifying Settings From the Control Panel
3-52 bizhub 360
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3
Touch the button for a set (Set 1 to Set 5), and then use the keypad to
type in the address range.
– The range setting cannot include “0.0.0.0”. For example, to specify
all addresses before 192.168.1.20, specify the range from 0.0.0.1 to
192.168.1.20.
– Touch [Deny Access] to specify the IP addresses to refuse access.
The procedure for setting the IP addresses is the same as on the
Permit Access screen.
– To edit the values that you entered, touch [
←] or [→] to move the
cursor to the desired area, touch [Delete], and enter the new value.
– To clear all values, press the [C] (clear) key.
4
Touch [OK].
IP filtering is set.
2
Note
To cancel changes to the setting, touch [Cancel].