Konica Minolta bizhub 360 - Manual (Page 300)

Specifying Settings Using PageScope Web Connection 4
bizhub 360 4-29
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
When “SMB: Scan” is selected
Erase Specify the width of the perimeter of the document to be erased.
Center Erase Specify the width of the area along the binding that is to be erased.
Neg-/Positive Reverse Select whether or not the black and white areas of the document are
reversed in the scan.
Non-Image Area Erase Select whether or not the shadows along the edges of a document are
erased from the scan.
Item Description
Item Description
No. Enter the registration number.
Name Enter the registration name (up to 24 characters).
Select from Address Book Click , and then select the destination from the list to
display the one-touch lists.
Direct Input Directly enter the destination. Specify settings for the
following.
Host Address (Enter using capital letters.)
File Path (Enter using capital letters.)
User ID
Password
When entering the host name, select the “Please check to en-
ter host name.” check box.
Resolution Select the resolution.
File Type Select the file format.
Scan Setting Select the unit of the data to be saved.
Simplex/Duplex Select “1-Sided”, “2-Sided”, or “Cover + 2-Sided”.
Original Type Select the quality of the original such as text or photo.
Separate Scan Enable/disable the “Separate Scan” function.
Density Adjust the density.
Zoom Select the enlargement or reduction ratio for scanning. Select
a preset zoom ratio or specify separate ratios for the X and Y
directions.
Scan Size Select the original size (“Auto”, “Standard Size”, “Custom
Size”).
For “Custom Size”, specify the horizontal and vertical
scanning sizes.
E-Mail Notification The upload destination of the file can be notified to the spec-
ified address.
Destination Click to select the notification addresses.
File Name Enter the file name (up to 30 characters).
Original Direction Select the orientation of the original document.
Bind Select the original binding position.