Konica Minolta bizhub PRO C500 - Manual (Page 8)

Register / Select Device (Continued)
8
● Select Device
When you are using multiple print controllers, you can reg-
ister the print controllers respectively.
This is the procedure to connect other print controller when
one print controller is already connected.
1.
On the Fiery Remote Scan basic win-
dow, click [Choose Device].
The Setup window appears.
2.
From the My Fiery List, select other
print controller and click [OK].
When the print controller you selected is connected
properly, the basic window appears to operate the print
controller.
● About other buttons
The functions of other buttons on the Fiery Remote Scan
setup window are as follows.
[Copy] button
If this button is pressed while a print controller in My
Fiery List is selected, the registered contents are
copied.
[Modify] button
If this button is pressed while a print controller in My
Fiery List is selected, the registered contents are
displayed on the basic window [Configuration]. The
contents can be changed on the window.
[Remove] button
If this button is pressed while a print controller in My
Fiery List is selected, the print controller is deleted.