Konica Minolta bizhub PRO C500 - Manual (Page 7)

7
Register / Select Device
To use the Fiery Remote Scan, a device, that is, the print con-
troller must be registered.
This is the procedure to register a device.
● Register Device
1.
Display the Fiery Remote Scan Device
setup window.
If the basic window is opened, click [Choose Device] to open
the setup window.
2.
In the [Server Name (or IP address)]
column, enter the print controller's IP
address.
For the print controller's IP address, contact your Net-
work administrator.
3.
In the [Device] column, enter the print
controller's name.
For the device name, contact the controller's adminis-
trator.
4.
If you want to give a nickname to the
print controller, check [Use Nickname]
and enter the nickname.
5.
When the IP address and the print control-
ler's name are entered, the
▼ button turns
green. Click the
▼ button.
The entered contents are added and displayed in the list.
Select a print controller you want to access and click
[OK]. Now the print controller is ready to be accessed.
This is the end of device registration.