Konica Minolta bizhub C3850 - Manual (Page 61)

[Scan Functions] 5-3
5.2 Preparation for WebDAV send (for administrators) 5
5.2 Preparation for WebDAV send (for administrators)
5.2.1 Preparation flow
Connecting this machine to the network
 Checking a LAN cable for connection
 Checking the network settings
% Check that an IP address is assigned to this machine.
Preparing the environment required to use the WebDAV Send function
 Enabling the WebDAV Send function
% You can use this function with the default settings unless otherwise requested.
Configuring the machine to suit your environment
 Registering a frequently used destination
% This will save you from having to enter a destination each time you send data.
 Using the proxy server
% When transferring data via a proxy server in your network environment, configure its setting.
 Using SSL communication
% If a communication with the WebDAV server is encrypted using SSL in your environment, configure
its setting.
Preparation finished
5.2.2 Operations required to use this function
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
Checking the network settings
Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
d
Reference
If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chap-
ter 4 "Initial Settings of This Machine" in [Quick Start Guide].
Checking the environment to use the WebDAV Send function
Enable the WebDAV Send function. (You can use this function with the default settings unless otherwise re-
quested.)
For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide: Applied Functions].