Konica Minolta bizhub 500 - Manual (Page 63)

Using copy functions
2
bizhub 500/420 2-27
U
s
in
g cop
y
fu
nct
ion
s
Ch
ap
te
r 2
*1
If no finisher is installed and all of the following
conditions are met, printed copies can be fed out
and sorted in an alternating crisscross pattern.
– 8-1/2×11- or 5-1/2×8-1/2-size paper is used.
– Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
– The “Auto Paper Select” setting is selected.
– The “Mixed Original” function must not be used.
*2
If the “Corner Staple” or “2 Staples” setting is
selected, the “Sort” setting is automatically
selected. The “Corner Staple” or “2 Staples” setting
and the “Offset” setting cannot be used together.
*3
The Staple settings are available only if optional
finisher FS-511 or finisher FS-510 is installed.
*4
The Punch settings are available only if optional
finisher FS-511 or punch unit PU-501 is installed on
finisher FS-510.
The following procedure describes how to select
Finishing settings.