Konica Minolta bizhub 500 - Manual (Page 5)

Introduction
bizhub 500/420 x-3
Contents
1 Before making copies
1.1 Control panel parts and their functions .1-2
1.2 Adjusting the angle of the control
panel ..........................................................1-6
To lower the angle of the control
panell ...................................................... 1-7
To raise the angle of the control
panel ....................................................... 1-7
1.3 Screens in Enlarge Display mode ...........1-8
To display the screens in Enlarge
Display mode .......................................... 1-8
1.4 Touch panel ............................................1-10
Touch panel operation .......................... 1-10
Icons that appear in the screen ............ 1-11
Paper type icons ................................... 1-12
Paper supply icons ............................... 1-14
1.5 Feeding the original ...............................1-15
To load the original into the ADF .......... 1-15
To place the original on the original
glass ...................................................... 1-16
1.6 Specifying original settings ...................1-18
Copying originals of mixed sizes
(“Mixed Original” setting) ...................... 1-19
Selecting the original orientation
(“Original Direction” settings) ................ 1-22