Konica Minolta bizhub 500 - Manual (Page 110)

4
Using fax functions
4-4 bizhub 500/420
Us
ing fax
func
tions
Ch
apt
e
r 4
5
Press [Start] on the control panel.
– If the “Destination Check Display Function” was
set to “ON”, the Check Destination screen
appears. Check the destinations, and then touch
[TX].
!
Detail
Scanning of the original begins, and the fax is sent. If the
machine is set to display the transmission result report
screen, a screen appears, requesting confirmation to
print the transmission result report. To print the
transmission result report, touch [Yes].
To stop the transmission, press [Stop].
If the transmission could not be completed correctly, a
transmission result report is printed.