Konica Minolta bizhub 500 - Manual (Page 103)

Using scan functions
3
bizhub 500/420 3-25
Usin
g sca
n fu
nc
tion
s
Ch
ap
te
r 3
Original Setting
Select the orientation in which the original is loaded
and the location of the binding margin for double-sided
originals.
These functions can be used together.
Setting Description
Original
Direction Select the orientation of the original. The data
is processed so that the top and bottom of
the original are correctly positioned after the
original is scanned. For details on original
orientation settings that are available, refer to
“Selecting the original orientation (“Original
Direction” settings)” on page 1-22.
Bind Select the binding position, such as when
holes are punched in the printed sheet or the
printed sheet is stapled.
This adjusts the scan of double-sided
originals so that the binding position is not
reversed.
Left: Select this setting for a original with
binding on the left side.
Top: Select this setting for a original with
binding at the top.
Right: Select this setting for a original with
binding on the right side.
Auto: The binding is on the long side if the
page is 11-11/16 in. or less, or it is on the
short side if the page is more than 11-11/16
in.