Konica Minolta bizhub 500 - Manual (Page 118)

4
Using fax functions
4-12 bizhub 500/420
Us
ing fax
func
tions
Ch
apt
e
r 4
2
If necessary, special dialing symbols, such
as a tone, pause or dash, can be entered.
The recipient’s fax number can also be
entered by using the keypad.
– To clear the entered recipient number, touch
[Del.].
– To specify an additional recipient, touch [Next
Dest.], and then enter the number.
– To clear all of the selected destinations, press
[Reset].
– To check/delete the specified destination, press
[Mode Check]. For details on checking/deleting
destinations, refer to “Checking the settings
(Mode Check)” on page 5-10.
– Additional destinations can be added from
programs or groups.
– [Tone]: If pulse dialing is being used, touch this
key to send a push-key tone. This is used when
a fax information service is being used. “T”
appears in the screen. If pulse dialing is being
used, use
to switch to a push-key tone.