Konica Minolta bizhub 360 - Manual (Page 73)

2 Administrator Operations
2-54 360
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
6
To prevent entry of a wrong password, enter the 20-digit HDD Lock
Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Setting screen.
7
Touch [OK].
? What happens if there is a mismatch in the HDD Lock Passwords?
% If there is a mismatch in the HDD Lock Passwords, a message ap-
pears that tells that there is a mismatch in the HDD Lock Pass-
words. Perform steps 4 and 5 once again.
8
Make sure that a message appears prompting you to turn OFF and
then ON the main power switch. Now, turn OFF and then turn ON the
main power switch.
2
Note
NEVER forget the HDD Lock Password set through the above procedure.
The HDD Lock Password must be entered when changing canceling the
HDD Lock Password.
360_security_E.book 54 ページ ２００７年３月７日 水曜日 午後２時５０分