Konica Minolta bizhub 360 - Manual (Page 38)

Administrator Operations 2
360 2-19
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.5 Setting the Authentication Method
When access to the Administrator Setting mode by the Administrator of the
machine via the control panel is authenticated, the machine enables setting
of the Authentication Method for User Authentication.
Authentication Method may be [ON (MFP)] that uses the authentication sys-
tem the machine has, [ON (External Server)] that uses a user information con-
trol system of the external server, or [OFF].
If the Enhanced Security mode is set to [ON], the authentication method
should be operated by either [ON], select [ON (MFP)] or [ON (External Server)]
(Active Directory).
2
Reminder
If [ON (External Server)] is selected for the Authentication Method, be
sure to select [Active Directory].
2.5.1 Setting the Authentication Method
2
Note
Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.
0 For the procedure to call the Administrator Setting mode to the display,
see “Accessing the Administrator Setting mode” on page 2-2.
1
Call the Administrator Setting Mode to the screen from the control pan-
el.
2
Touch [User Authentication/Account Track].
360_security_E.book 19 ページ ２００７年３月７日 水曜日 午後２時５０分