Konica Minolta bizhub 360 - Manual (Page 104)

Administrator Operations 2
360 2-85
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.14 NetWare Setting Function
When access to the Administrator Setting mode by the Administrator of the
machine is authenticated, the machine enables registration as the Print Serv-
er.
2.14.1 Making the NetWare Setting
2
Note
Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.
0 For the procedure to call the Network Setting menu to the display, see
steps 1 and 2 of “Changing the auth-password and priv-password” on
page 2-72.
1
Call the Network Setting to the screen from the control panel.
2
Touch [NetWare Setting].
3
Touch [Fwd. ¡].
4
Make the necessary settings.
5
Touch [OK].
360_security_E.book 85 ページ ２００７年３月７日 水曜日 午後２時５０分