Precaution, Installation precautions, Installation site – Konica Minolta bizhub 25 User Manual
Page 9: Power source
viii Precaution
Precaution
Besides the “Safety Information” supplied with this product, please observe the following
instructions.
Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the machine in a
location that meets the following requirements:
A location away from curtains, etc. that may catch fire and burn easily
•
A location that is not exposed to water or other liquids
•
A location free from direct sunlight
•
A location out of the direct airflow of an air conditioner or heater, and not
•
exposed to
extremely high or low temperatures
A well-ventilated location
•
A location that is not exposed to high humidity
•
A dust-free, or low-dust, environment.
•
A location not subjected to undue vibrations
•
A stable and level location
•
A location where ammonia or other organic gases are not generated
•
A location that does not put the operator in the direct airflow of exhaust from the
•
machine
A location that is not near any kind of heating devices
•
Power Source
The power source requirements are as follows.
Voltage Fluctuation: AC
•
120 V ± 10 Hz
Frequency Fluctuation: Within ± 3Hz
•
Use a power source with as few voltage or frequency fluctuations as possible.
•