beautypg.com

Connection and main settings, Connecting the power cord, Connecting the lan cable – Konica Minolta bizhub 25 User Manual

Page 31: Connection and main settings -12

background image

1-12 Connection and Main Settings

Connection and Main Settings

Connecting the Power Cord

Warning

Connect the power cord to the power jack, and confirm that it is firmly inserted.

Loose connections may cause fires.

Make sure to connect the ground wire to prevent electrocution in case of electrical

leakage.

Confirm that there is no dust attached to the power plug before inserting it into

the outlet. Remove, inspect, and if necessary, clean the power plug once every six

months to a year. Dust attached to the power plug may cause fires or electrocutions.

Connect the power cord to the power jack on the left side of the machine.

1

Secure the power cord using the included clamp.

Use the screw that is attached to the cover.

Insert the power plug into the power outlet.

2

Connecting the LAN Cable

Attach a ferrite core to the LAN cable.

1

Make a loop near the connector of the cable.