Konica Minolta Magicolor 2550 - Manual (Page 57)

Configuration Menu Overview 43
SUBNET
MASK Setting 0.0.0.0
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
ENABLE
HTTP Setting YES/NO
Specify whether or not HTTP is used.
If YES is selected, the Web page pro-
vided to the printer by the built-in HTTP
server is enabled.
If NO is selected, the Web page cannot
be used.
ENABLE
AUTO
IP Setting YES/NO
Select whether or not the IP address is
automatically acquired when DHCP/
BOOTP and PING, ARP are not
functioning or when there is no response.
If NO is selected, the IP address is not
automatically acquired.
If YES is selected, the IP address is
automatically acquired.
IPX/SPX FRAME
TYPE
Settings AUTO/802.2/802.3/
ETHER II/SNAP
Specify the protocol used with NetWare.
ETHER
TALK NAME Settings magicolor 2550
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
NAME2 Settings -
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.