Konica Minolta Magicolor 2550 - Manual (Page 51)

Configuration Menu Overview 37
TRAY
CHAINING Settings YES/NO
If YES is selected and the specified paper tray runs
out of paper during printing, a paper tray loaded with
paper of the same size is automatically selected so
printing can continue.
If NO is selected and the specified paper tray runs
out of paper, printing stops.
MAP MODE Settings ON/OFF
Select whether or not the Tray Mapping
function is used.
LOGI-
CAL
TRAY
0-9 Settings PHYSICAL TRAY 1/
PHYSICAL TRAY 2
Specify whether jobs received from
another manufacturer's printer driver are
printed using Tray 1 or Tray 2.
PHYSICAL TRAY 2 is the default only
for LOGICAL TRAY 2 . The default for
all other logical trays is PHYSICAL
TRAY 1 .
DUPLEX Settings OFF/SHORTEDGE/LONGEDGE
If OFF is selected, duplex printing is not possible.
If LONGEDGE is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORTEDGE is selected, the pages will be printed on both
sides of the paper for short-edge binding.
ORIEN-
TATION Settings PORTRAIT/LANDSCAPE
Specify the orientation of the media.
PAGE
RECOV-
ERY Settings ON/OFF
Select whether or not the page is printed again after recovering
from a paper misfeed.
If ON is selected, the page that was misfed is printed again.
If OFF is selected, printing continues with the next page without
printing the misfed page.