Konica Minolta Magicolor 2550 - Manual (Page 56)

Configuration Menu Overview 42
!"
All factory default values are shown in bold.
ETHER-
NET TCPIP ENABLE Settings YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
DHCP/
BOOTP Settings YES/NO
Select whether or not the IP address is
automatically acquired.
If YES is selected, the IP address is auto-
matically acquired.
If NO is selected, the IP address is not
automatically acquired.
IP
ADDRESS Setting 192.168.1.2
Set the IP address for this printer on the
network.
Use the Up, Down, Left, and Right keys
to specify the value.
If the IP address is manually specified,
DHCP/BOOTP is automatically set to NO .
DEFAULT
ROUTER Setting 192.168.1.2
Specify the IP address of the router if one
is on the network. Use the Up, Down,
Left, and Right keys to specify the value.
ENABLE USB
ACTIVE I/F
JOB TIMEOUT
JOB TIMEOUT PARALLEL