Konica Minolta bizhub 652 - Manual (Page 52)

bizhub 652/602/552/502 3-3
3.1 User Authentication Function 3
the PKI Encrypted Document User Box. For the detailed procedure to access the PKI Encrypted
document, see page 3-4.
2
Enter the PIN code registered in the IC card from the 10-key pad. If the PIN code includes any character
other than numerals, touch [PIN Code].
% Touch [Cancel] to go back to the screen shown in step 1.
% Go to step 4 if the PIN code consists only of numerals.
3
Enter the PIN code from the keyboard or 10-key pad and touch [OK].
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the screen shown in step 2.
4
Touch [OK].
% The PKI Encrypted Document is automatically deleted as soon as the printing is normally terminat-
ed.
% If a wrong PIN code is entered two or more consecutive times, the IC card is put into a locked state
and becomes no longer valid for authentication. If the IC card is locked, contact the IC card admin-
istrator. This machine is not useful for unlocking the IC card.
% If the IC card is locked, a message appears that tells that the IC card cannot be used. Contact the
IC card administrator.
% The number of consecutive failure count for the locking depends on the setting made on the IC card
side.
% If authentication fails, the permissible authentication failure count appears.
5
To log off, pull out the IC card from the IC card reader.