Konica Minolta bizhub 652 - Manual (Page 28)

bizhub 652/602/552/502 2-15
2.5 Changing the Administrator Password 2
neer; or, turn off, and then turn on, the main power switch of the machine. If the main power switch
is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time
Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds to turn
it on after turning it off. If there is no wait period between turning the main power switch off, then on
again, the machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on
and off:
Turn off the sub power switch ö Turn off the main power switch ö Turn on the main power switch
ö Turn on the sub power switch
5
Enter the new 8-to-16-digit Administrator Password from the keyboard or keypad.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the Security Settings screen.
6
Touch [OK].
% If the entered Administrator Password does not match, a message that tells that the Administrator
Password does not match appears. Enter the correct Administrator Password.