Konica Minolta bizhub 652 - Manual (Page 5)

bizhub 652/602/552/502 1-2
1.1 Introduction 1
1 Security
1.1 Introduction
Thank you for purchasing our product.
This User’s Guide contains the operating procedures and precautions to be used when using the security
functions offered by the bizhub 652/602/552/502 machine. To ensure the best possible performance and ef-
fective use of the machine, read this manual thoroughly before using the security functions. The Administrator
of the machine should keep this manual for ready reference. The manual should be of great help in finding
solutions to operating problems and questions.
This User’s Guide (Ver. 1.01) describes bizhub 652/bizhub 602/bizhub 552/bizhub 502 PKI Card System Con-
trol Software (MFP Controller: A2WU0Y0-0100-G00-F2pki).
Compliance with the ISO15408 Standard
The security functions offered by the bizhub 652/602/552/502 machine comply with ISO/IEC15408 (level:
EAL3).
Operating Precautions
The machine gives an alarm message or an alarm sound (peep) when a wrong operation is performed or a
wrong entry is made during operation of the machine. (No "peep" alarm sound is issued if a specific sound
setting in Sound Setting of Accessibility Setting is set to [OFF].) If the alarm message or alarm sound is given,
perform the correct operation or make the correct entry according to the instructions given by the message
or other means.
The Administrator of the machine should exit from the current mode to return to the basic screen whenever
the access to that mode is completed or if he or she leaves the machine with the mode screen left displayed.
The Administrator of the machine should make sure that each individual general user exits from the current
mode to return to the basic screen whenever the access to that mode is completed or if the user leaves the
machine with the mode screen left displayed.
If an error message appears during operation of the machine, perform steps as instructed by the message.
For details of the error messages, refer to the User’s Guide furnished with the machine. If the error cannot be
remedied, contact your service representative.