Konica Minolta bizhub 552 - Manual (Page 63)

Appendix 5
AU-211P 62
5 Appendix
5.1 Product Specifications
5.2 Cleaning the Authentication Unit
Wipe the surface using a soft, dry cloth. If the surface is still dirty, moisten a
cloth with mild detergent and thoroughly wring it out before cleaning. Once
the dirt has been removed, moisten a cloth with water, thoroughly wring it
out, and wipe off the detergent.
2
Reminder
• Remove this unit from the MFP before cleaning. Loading the USB port
will result in a malfunction.
• Take care so that no water gets into this unit when cleaning. If water gets
into this unit, it will result in a malfunction.
• Do not clean this unit using organic solvent such as benzene or alcohol.
Doing so will result in a malfunction.
• Before disconnecting or connecting this unit, turn the MFP Main Power
off. After 10 seconds or more have lapsed, turn the MFP Main Power on.
Failing to do so may result in a malfunction.
• When connecting or disconnecting the USB cable, hold the plug. Failing
to do so will result in a malfunction.
Product name Authentication unit (PKI-IC card type) AU-211P
Dimensions 70 mm (L) × 70 mm (W) × 10 mm (H)
Weight 60 g
Power supply USB bus power
Range of
operating temperature 0 to 50°C
Interface Full speed USB (12 Mbps)
Connector shape USB A type connector
Compatible card PKI-IC card (PIV, CAC)