Konica Minolta bizhub 552 - Manual (Page 27)

How to Use the Authentication Unit 3
AU-211P 26
3.3.2 Related Settings
This section explains how to configure the address search (LDAP) settings
on the MFP that supports this system.
Enabling LDAP
Configure settings to use the LDAP server.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [LDAP Settings] - [Enabling
LDAP].
Setting Up LDAP
Register the desired LDAP server to search for the destination.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [LDAP Settings] - [Setting Up
LDAP].
Item Description
Enabling LDAP Select [ON].