Konica Minolta bizhub 552 - Manual (Page 5)

Introduction 1
AU-211P 4
1.1 Safety Information
Carefully read this information, and then store it in a safe place.
- Before using this device, carefully read this information and follow it
to operate the device correctly.
- After reading this information, store it in the designated holder with
the warranty.
Important information
- The reprinting or reproduction of the content of this publication, either
in part or in full, is prohibited without prior permission.
- The content of this publication is subject to change without notice.
- This publication was created with careful attention to content;
however, if inaccuracies or errors are noticed, please contact your
sales representative.
- The marketing and authorization to use our company’s product
mentioned in this information are provided entirely on an “as is” basis.
- Our company assumes no responsibility for any damage (including
lost profits or other related damages) caused by this product or its
use as a result of operations not described in this information. For
disclaimers and warranty and liability details, refer to the User’s Guide
Authentication Unit (IC Card Type AU-211P).
- This product is designed, manufactured and intended for general
business use. Do not use it for applications requiring high reliability
and which may have an extreme impact on lives and property.
(Applications requiring high reliability: Chemical plant management,
medical equipment management and emergency communications
management)
- Use with other authentication devices is not guaranteed.
- In order to incorporate improvements in the product, the
specifications concerning this product are subject to change without
notice.
For safe use
• Do not this product near water, otherwise it may
be damaged.
• Do not cut, damage, modify or forcefully bend the
USB cable. A malfunction may occur as a result
of a damaged or cut USB cable.
• Do not disassembly this device, otherwise it may
be damaged.