Konica Minolta bizhub 552 - Manual (Page 22)

How to Use the Authentication Unit 3
AU-211P 21
3 How to Use the Authentication Unit
This chapter explains how to log in and log out using this unit and also
describes the functions for use with this system.
2
Note
The following explains the procedures applicable in the normal display
mode. This unit is also available in the Enlarge Display mode. For details
on the Enlarge Display mode, refer to the User's Guide [Enlarge Display
Operations] supplied together with the MFP.
3.1 Login and Logout
3.1.1 Login
Use the following steps to insert a PKI card into this unit and log into the
MFP.
1
Insert a PKI card in the unit.
– To change the server for authentication, click [Server Name] to
select a desired server before inserting a PKI card into this unit, and
click [OK].
– You can log in as a public user if Public User Access is enabled.
– If logging into the MFP as an administrator or User Box
administrator, press [ID & PW], and enter the password.