Konica Minolta bizhub 552 - Manual (Page 57)

How to Use the Authentication Unit 3
AU-211P 56
3.8.3 Related Settings
The following explains the settings required to use the Scan To Home
function.
Obtaining the Home folder position
Configure the setting to enable the user to obtain the position of the user's
Home folder from Active Directory.
Client Setting
Configure the setting to perform SMB TX.
For details on how to handle SMB TX using the PKI card and configure its
settings, refer to "SMB TX Using the PKI Card" (page 31).
2
Note
Specify the WINS server or direct hosting service to fit your environment.
For details, refer to the User's Guide [Network Administrator] supplied
together with the MFP.
Scan to Home Settings
Enable the Scan to Home function.
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [User Authentication/Account Track] - [Scan to
Home Settings].
Item Description
Scan to Home Settings Select [Enable].